telnet-server listen

Syntax

telnet-server listen [oobm|data|both]

no telnet-server listen [oobm|data|both]

Description

This command is used at the global config level to enable (the default) or disable all (IPv4 and IPv6) inbound Telnet access to the switch.

Options

no

The no form of the command disables inbound Telnet.

listen

The listen parameter is available only on switches that have a separate OOBM port. Values for this parameter are:

oobm

Inbound Telnet access is enabled only on the OOBM port.

data

Inbound Telnet access is enabled only on the data ports.

both

Inbound Telnet access is enabled on both the OOBM port and on the data ports. This is the default value.