show ospf3 link-state link-scope information

The commands in this section enable display of the routing-switch's OSPFv3 link-state link-scope database, with options for narrowing the scope of the output and increasing the range of settings included in the output.

Syntax

show ipv6 ospf3 link-state link-scope interface vlan-id lsid lsid-# router-id rtr-id-#[detail|advertise]

Description

Displays link-state link-scope database for all links configured on the routing switch. The range of displayed data can be reduced by using one or more subset options:

Options

interface vlan-id

Subset option to filter displayed LSA database or advertisements to show only the link-scope data from a specific VLAN.

Can also be filtered with other subset options (lsid and router-id) to further define the source of displayed information.

lsid lsid-#

Subset option to filter displayed LSA database or advertisements to show only the link-scope data having the specified (32-bit) IP address as a link-state ID.

Can also be filtered with other subset options (router-id and interface) to further define the source of displayed information.

router-id rtr-id-#

Subset option to filter displayed LSA database or advertisements to show only the link-scope data having the specified router-ID.

Can also be filtered with other subset options (lsid and interface) to further define the source of displayed information.

detail

Displays additional details for each LSA included in the range of displayed LSAs for any of the above options.

advertise

Displays the hexadecimal data in LSA packets (advertisements) within the OSPFv3 link scope on the routing switch.

The output can also be filtered by lsid and router-id.

Example output

To display link-scope link-state information, enter show ipv6 ospf3 link-state link-scope at any CLI level. When you enter this command, an output similar to the following is displayed:

Switch# show ipv6 ospf3 link-state link-scope

 OSPFv3 Link Scope Link State Database for LS index 599

           Advertising
  LSA Type Router ID    Link State ID Age Sequence # Checksum
  -------- ------------ ------------- --- ---------- ----------
  Link     1.1.1.1      599           842 0x80000009 0x0000fb93
  Link     15.255.155.1 599           903 0x80000009 0x00006185
  Link     1.0.0.4      632           845 0x80000009 0x00002a0c
  Link     15.255.155.1 632           874 0x80000009 0x0000662a

To display link-scope LSA advertisements in hexadecimal format, use the advertise keyword: