router ospf3 [enable|disable]
Syntax
router ospf3 [enable|disable]
Description
The
router ospf3 command executed alone puts the routing switch into
ospf3 context. The keyword options enable or disable OSPFv3 on the routing switch.
Usage
This command allows you to configure OSPFv3 before activating it on the routing switch. Global
IPv6 unicast-routing must be enabled before executing this command.
NOTE:
If you disable OSPFv3, the switch retains all the configuration information for the disabled protocol in flash memory. If you subsequently restart OSPF, the existing configuration will be applied.
Example input
Enable global OSPFv3 routing
Switch(config)# router ospf3 enable
Switch(ospf3)#