rpf-override
Syntax
rpf-override <SRC-ADDR/SRC-MASK> <RPF-ADDRESS>
no rpf-override <SRC-ADDR/SRC-MASK> <RPF-ADDRESS>
Description
Add, edit, or delete RPF override entries in PIMv6 interface.
The
no
form of this command deletes the RPF override from PIMv6 interface.
Command context
PIMv6
Parameters
<SRC-ADDR>
Specifies the IP address of the host from which the multicast flow originated.
<SRC-MASK>
Specifies the length in bits of the mask used to indicate the range of addresses from
<SRC-ADDR>
to which the RPF override command applies.
<RPF-ADDRESS>
Specifies a local router address on a PIM6-enabled VLAN to which
<SRC-ADDR>
is directly connected.