Viewing the current jumbo configuration
Syntax:
show vlans
Lists the static VLANs configured on the switch and includes a Jumbo column to indicate which VLANs are configured to support inbound jumbo traffic. All ports belonging to a jumbo-enabled VLAN can receive jumbo traffic. (For more information, see Configuring a maximum frame size.) See Figure Figure 23: Example: listing of static VLANs to show jumbo status per VLAN.
Syntax:
show vlans ports <port-list>
Lists the static VLANs to which the specified
ports belong, including the Jumbo column to indicate
which VLANs are configured to support jumbo traffic.
Entering only one port in <port-list
> results in a list of all VLANs
to which that port belongs.
Entering multiple ports in <port-list
> results in a superset list that
includes the VLAN memberships of all ports in the list, even though
the individual ports in the list may belong to different subsets of
the complete VLAN listing.
Example:
If port 1 belongs to VLAN 1, port 2 belongs to VLAN 10, and port 3 belongs to VLAN 15, executing this command with a port-list of 1 - 3 results in a listing of all three VLANs, even though none of the ports belong to all three VLANS. (See Figure 24: Listing the VLAN memberships for a range of ports.)
Syntax:
show vlans <vid>
Shows port membership and jumbo configuration for the specified vid . (See Figure 25: Example: of listing the port membership and jumbo status for a VLAN.)
