Information displayed with the detail parameter

When the show interfaces transceiver [port-list] detail command is executed, the following information displays.

Table 26: General transceiver information
Parameter	Description
Interface Index	The switch interface number
Transceiver-type	Pluggable transceiver type
Transceiver model	Pluggable transceiver model
Connector-type	Type of connector of the transceiver
Wavelength	For an optical transceiver: the central wavelength of the laser sent, in nm. If the transceiver supports multiple wavelengths, the values will be separated by a comma.
Transfer Distance	Link-length supported by the transceiver in meters. The corresponding transfer medium is shown in brackets following the transfer distance value, For example, 50um multimode fiber. If the transceiver supports multiple transfer media, the values are separated by a comma.
Diagnostic Support	Shows whether the transceiver supports diagnostics: None Supported DOM Supported VCT Supported
Serial Number	Serial number of the transceiver

The information in the next three tables is only displayed when the transceiver supports DOM.

Table 27: DOM information
Parameter	Description
Temperature	Transceiver temperature (in degrees Centigrade)
Voltage	Supply voltage in transceiver (Volts)
Bias	Laser bias current (mA)
RX power	Rx power (mW and dBm))
TX power	Tx power (mW and dBm)

The alarm information for GBIC/SFP transceivers is shown in this table.

Table 28: Alarm and error information (GBIC/SFP transceivers only)
Alarm	Description
RX loss of signal	Incoming (RX) signal is lost
RX power high	Incoming (RX) power level is high
RX power low	Incoming (RX) power level is low
TX fault	Transmit (TX) fault
TX bias high	TX bias current is high
TX bias low	TX bias current is low
TX power high	TX power is high
TX power low	TX power is low
Temp high	Temperature is high
Temp low	Temperature is low
Voltage High	Voltage is high
Voltage Low	Voltage is low

The alarm information for XENPAK transceivers is shown in this table.

Table 29: Alarm and error information (XENPAK transceivers)
Alarm	Description
WIS local fault	WAN Interface Sublayer local fault
Receive optical power fault	Receive optical power fault
PMA/PMD receiver local fault	Physical Medium Attachment/Physical Medium Dependent receiver local fault
PCS receiver local fault	Physical Coding Sublayer receiver local fault
PHY XS receive local fault	PHY Extended Sublayer receive local fault
RX power high	RX power is high
RX power low	RX power is low
Laser bias current fault	Laser bias current fault
Laser temperature fault	Laser temperature fault
Laser output power fault	Laser output power fault
TX fault	TX fault
PMA/PMD transmitter local fault	PMA/PMD transmitter local fault
PCS Transmit local fault	PCS transmit local fault
PHY XS transmit local fault	PHY SX transmit local fault
TX bias high	TX bias current is high
TX bias low	TX bias current is low
TX power high	TX power is high
TX power low	TX power is low
Temp high	Temperature is high
Temp low	Temperature is low

An Example: of the output for the show interfaces transceiver [port-list] detail for a 1000SX transceiver is shown below.

Detailed information for a 1000SX Mini-GBIC transceiver

switch(config)# show interfaces transceiver 21 detail

 Transceiver in 21
  Interface index    : 21
  Type               : 1000SX 
  Model              : J4858C
  Connector type     : LC 
  Wavelength         : 850nm
  Transfer distance  : 300m (50um), 150m (62.5um),
  Diagnostic support : DOM
  Serial number      : MY050VM9WB

 Status
  Temperature : 50.111C 
  Voltage     : 3.1234V
  TX Bias     : 6mA
  TX Power    : 0.2650mW, -5.768dBm
  RX Power    : 0.3892mW, -4.098dBm

 Time stamp   :  Mon Mar 7 14:22:13 2011

An Example: of the output for a 10GbE-LR transceiver is shown below.

Detailed information for a 10GbE-LR transceiver

switch(config)# show interfaces transceiver 23 detail

 Transceiver in 23
  Interface Index   : 24
  Type              : 10GbE-LR 
  Model             : J8437A
  Connector type    : SC
  Wavelength        : Channel #0: 1310nm, #1:0nm, #2:0nm, #3:0nm
  Transfer distance : 10000m (SM)
  Diagnostic support: DOM
  Serial number     : ED456SS987

 Status
  Temperature : 32.754C 
  TX Bias     : 42.700mA
  TX Power    : 0.5192mW, -2.847dBm
  RX Power    : 0.0040mW, -23.979dBm

 Recent Alarms:

  Rx power low alarm
  Rx power low warning

 Recent errors:
  Receive optical power fault
  PMA/PMD receiver local fault
  PMA/PMD transmitter local fault
  PCS receive local fault
  PHY XS transmit local fault

 Time stamp : Mon Mar 7 16:26:06 2013