General steps for configuring SNMP notifications
Procedure
-
Determine the versions of SNMP notifications that you want to use in your network.
If you want to use SNMPv1 and SNMPv2c traps, you must also configure a trap receiver. See the following sections and follow the required configuration procedures:
If you want to use SNMPv3 notifications (including traps), you must also configure an SNMPv3 management station. Follow the required configuration procedure in Configuring SNMPv3 notifications (CLI).
- To reconfigure any of the SNMP notifications that are enabled by default to be sent to a management station (trap receiver), see Enabling Link-Change Traps (CLI).
- (Optional) See the following sections to configure optional SNMP notification features and verify the current configuration: