Displaying the current rate-limit configuration

The show rate-limit all command displays the per-port rate-limit configuration in the running-config file.

Syntax:


show rate-limit all [<port-list>]

Without [port-list] , this command lists the rate-limit configuration for all ports on the switch.

With [port-list] , this command lists the rate-limit configuration for the specified ports. This command operates the same way in any CLI context.

If you want to view the rate-limiting configuration on the first six ports:

Example:

Listing the rate-limit configuration shows a rate-limiting configuration for the first six ports. In this instance:

Ports 1–4 are configured with an outbound rate limit of 200 Kbps.
Port 5 is configured with an inbound rate limit of 20%.
Port 6 is not configured for rate-limiting.

Listing the rate-limit configuration

switch# show rate-limit all 1-6

 All-Traffic Rate Limit Maximum %

         | Inbound            Radius      | Outbound           Radius
  Port   | Limit     Mode     Override    | Limit     Mode     Override
  ------ + --------- -------- ----------- + --------- -------- --------
  1      | Disabled  Disabled No-override | 200       kbps     No-override
  2      | Disabled  Disabled No-override | 200       kbps     No-override
  3      | Disabled  Disabled No-override | 200       kbps     No-override
  4      | Disabled  Disabled No-override | 200       kbps     No-override
  5      | 20        %        No-override | Disabled  Disabled No-override
  6      | Disabled  Disabled No-override | Disabled  Disabled No-override

NOTE:

To view RADIUS-assigned rate-limit information, use one of the following command options:

show port-access
    web-based clients <port-list> detailed
    mac-based clients <port-list> detailed
    authenticator clients <port-list> detailed

For more on RADIUS-assigned rate-limits, see title "Configuring RADIUS Server Support for Switch Services" in the latest Management and Configuration Guide for your switch.

The show running command displays the currently applied setting for any interfaces in the switch configured for all traffic rate-limiting and ICMP rate limiting.

The show config command displays this information for the configuration currently stored in the startup-config file. (Note that configuration changes performed with the CLI, but not followed by a write mem command, do not appear in the startup-config file.)

Rate-limit settings listed in the show config output

switch# show config

Startup configuration: 3

; J9727A Configuration Editor; Created on release #WB.15.18.0000x
; Ver #09:14.29.eb.8f.fc.f3.ff.37.2d:ba

hostname "Switch"
module 1 type j9727a
interface 1
   rate-limit all out kbps 200
   exit
interface 2
   rate-limit all out kbps 200
   exit
interface 3
   rate-limit all out kbps 200
   exit
interface 4
   rate-limit all out kbps 200
   exit
interface 5
   rate-limit all in percent 20
   exit