Configuring per-port transmit and receive modes (CLI)

Syntax:


lldp admin-status <port-list> {<txonly | rxonly | tx_rx | disable>}

With LLDP enabled on the switch in the default configuration, each port is configured to transmit and receive LLDP packets. These options enable you to control which ports participate in LLDP traffic and whether the participating ports allow LLDP traffic in only one direction or in both directions.

`txonly`	Configures the specified ports to transmit LLDP packets, but block inbound LLDP packets from neighbor devices.
`rxonly`	Configures the specified ports to receive LLDP packets from neighbors, but block outbound packets to neighbors.
`tx_rx`	Configures the specified ports to both transmit and receive LLDP packets. (This is the default setting.)
`disable`	Disables LLDP packet transmit and receive on the specified ports.