Adding a priority description

This description can be added with the CLI or SNMP. The CLI command is:

Syntax:


logging priority-descr <text_string> 
 no logging priority-descr

Provides a user-friendly description for the combined filter values of severity and system module. If no description is entered, this is blank.

If text_string contains white space, use quotes around the string.

Use the no form of the command to remove the description.

Limit: 255 characters

The logging command with a priority description

switch(config)# logging priority-descr severe-pri

NOTE:

A notification is sent to the SNMP agent if there are any changes to the syslog parameters, either through the CLI or with SNMP.