Viewing system software image information for both management modules
The
show version command displays system software image information for both management modules, as well as which module is the active management module and which is the standby management module. The Boot Image field displays which flash image last booted from, even if the
boot set-default command has been set to change the flash booted from on the next boot. The output of the
show version command when redundancy is enabled is shown in
show version command when redundancy is enabled .
Example
show version command when redundancy is enabled 
When redundancy is disabled, the output of the
show version command changes, as shown in
show version command when redundancy is disabled .
Example
show version command when redundancy is disabled 