show lldp info remote-device
Syntax
show lldp info remote-device<PORT-LIST>Description
Without the
<PORT-LIST>
option, provides a global list of the individual devices it has detected by reading LLDP advertisements. Discovered devices are listed by the inbound port on which they were discovered.
Multiple devices listed for a single port indicates that such devices are connected to the switch through a hub.
Discovering the same device on multiple ports indicates that the remote device may be connected to the switch in one of the following ways:
Through different VLANS using separate links. (This applies to switches that use the same MAC address for all configured VLANs.)
Through different links in the same trunk.
Through different links using the same VLAN. (In this case, spanning-tree should be invoked to prevent a network topology loop. Note that LLDP packets travel on links that spanning-tree blocks for other traffic types.)
With the
<PORT-LIST>
option, provides a listing of the LLDP data that the switch has detected in advertisements received on the specified ports.
See also Table 1.
A global listing of discovered devices
Switch# show lldp info remote LLDP Remote Devices Information LocalPort | ChassisId PortId PortDescr SysName --------- + ------------------------- ------ --------- ------------- 1 | 00 11 85 35 3b 80 6 6 Switch 3500yl 2 | 00 11 85 cf 66 60 8 8 Switch 3500yl
