snmp-server mac-notify
Syntax
[no] snmp-server enable traps mac-notify [mac-move | trap-interval <0- 120>]
Description
Globally enables or disables generation of SNMP trap notifications.
Parameters
- trap-interval
The time interval (in seconds) that trap notifications are sent. A value of zero disables the interval and traps are sent as events occur. If the switch is busy, notifications can be sent prior to the configured interval. Notifications may be dropped in extreme instances and a system warning is logged.The range is 0-120 seconds. Default: 30 seconds.
- mac-move
Configures the switch to capture data for MAC addresses that are moved from one port to another port. The
snmp-server enable traps mac-notify
command must have been enabled in order for this information to be sent as an SNMP notification.
trap-interval
switch(config)# snmp-server enable traps mac-notify trap-interval 60
mac-move
switch(config)# snmp-server enable traps mac-notify mac-move
mac-notify at the interface context level
You can also execute the mac-notify
traps
command from the interface context.
switch# int 11 switch(int-11)# mac-notify traps learned