show fault-finder broadcast-storm
Syntax
show fault-finder broadcast-storm [ethernet <PORT-LIST>]
Description
Display the broadcast-storm-control configuration.
Parameters
- broadcast-storm
Configure broadcast storm control.
- pps
Rising threshold level in number of broadcast packets per second.
- Percent
Rising threshold level as a percentage of bandwidth of the port. The percentage is calculated on 64 byte packet size.
- warn
Log the event only.
- warn-and-disable
Log the event and disable the port.
- seconds
Re-enable the port after waiting for the specified number of seconds. Default is not to re-enable.
show example 1
Show example 2
switch(config)# show fault-finder broadcast-stormShow example 3
switch(config)# show fault-finder broadcast-storm A1Show example 4
switch(config)# show fault-finder broadcast-storm