int poe-lldp-detect
Syntax
int <PORT-LIST> poe-lldp-detect [enabled|disabled]
Description
Allows the data link layer to be used for power negotiation between a PD on a PoE port and LLDP.
Default: Disabled
Enable LLDP
switch(config) # int 7 PoE-lldp-detect enabled
Interface context
switch(eth-7) # PoE-lldp-detect enabled
NOTE:
Detecting PoE information via LLDP affects only power delivery; it does not affect normal Ethernet connectivity.
Port with LLDP configuration information obtained from the device
switch(config)# show power-over-ethernet brief Status and Counters - Port Power Status System Power Status : No redundancy PoE Power Status : No redundancy Available: 273 W Used: 0 W Remaining: 273 W Module A Power Available: 273 W Used: 0 W Remaining: 273 W PoE | Power Power Alloc Alloc Actual Configured Detection Power Port | Enable Priority By Power Power Type Status Class ------ ------ --------- ----- ----- ------ ----------- ----------- --- Pre-std Detect ------ A1 | Yes low usage 17 W 0.0 W Searching 0 off A2 | Yes low usage 17 W 0.0 W Searching 0 off A3 | Yes critical usage 17 W 0.0 W Searching 0 off A4 | Yes critical usage 17 W 0.0 W Searching 0 off A5 | Yes critical usage 17 W 0.0 W Searching 0 off A6 | Yes high usage 17 W 0.0 W Searching 0 off A7 | Yes high usage 17 W 0.0 W Searching 0 off A8 | Yes high usage 17 W 0.0 W Searching 0 off A9 | Yes low usage 17 W 0.0 W Searching 0 off A10 | Yes low usage 17 W 0.0 W Searching 0 off A11 | Yes low usage 17 W 0.0 W Searching 0 off A12 | Yes low usage 17 W 0.0 W Searching 0 off A13 | Yes low usage 17 W 0.0 W Searching 0 off A14 | Yes low usage 17 W 0.0 W Searching 0 off A15 | Yes low usage 17 W 0.0 W Searching 0 off A16 | Yes low usage 17 W 0.0 W Searching 0
