Enabling TimeP for DHCP

Suppose time synchronization is configured for SNTP. Following this example to enable TimeP for DHCP.

Procedure
  1. View the current time synchronization.
  2. show timep displays the TimeP configuration and also shows that SNTP is the currently active time synchronization mode.
  3. Select TimeP as the time synchronization mode.
  4. Enable TimeP for DHCP mode.
  5. View the TimeP configuration.
  6. show timep again displays the TimeP configuration and shows that TimeP is now the currently active time synchronization mode. 

switch(config)# show timep

 Timep Configuration

  Time Sync Mode: Sntp
  TimeP Mode : Disabled
  Poll Interval (min) [720] : 720

switch(config)# timesync timep

switch(config)# ip timep dhcp

switch(config)# show timep

 Timep Configuration
  Time Sync Mode: Timep
  TimeP Mode : DHCP Poll Interval (min): 720