sntp server priority

Syntax

sntp server priority 1–3 [<IP-ADDRESS>]<VERSION-NUM>[<KEY-ID> <1–4,294,967,295>]
        

no sntp server priority 1–3 [<IP-ADDRESS>]<VERSION-NUM>[<KEY-ID> <1–4,294,967,295>]
        

Description

Configures a key to be associated with a specific server. The key itself must already be configured on the switch. Default: No key is associated with any server by default. The no form of the command disassociates the key from the server. This does not remove the authentication key.

Parameters

priority

Specifies the order in which the configured servers are polled for getting the time.

version-num

Specifies the SNTP software version to use and is assigned on a per-server basis. The version setting is backwards-compatible. For example, using version 3 means that the switch accepts versions 1 through 3. Default: 3; range: 1 - 7.

key-id

Optional command. The key identifier sent in the SNTP packet. This key-id is associated with the SNTP server specified in the command.