vsf member remove
This command removes the entire configuration for a specified member. After issuing the command, the specified member-ID is available for re-use and may be provisioned or assigned to another device.
If the member physically exists, its configuration will be erased. It will then be powered down by default.
Syntax
vsf member
<MEMBER-ID> remove
Description
This command erases the VSF member configuration and VSF member will be powered off.
Parameters
- <MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to 2.
Restriction
This command will not be available until VSF is enabled.