Provisioned configuration mode procedure
The following procedure configures devices into VSF members:
Procedure
- Configure VSF memberID and VSF links on one switch and enable VSF on that switch.
- After reboot, the device will come up as standalone VSF commander. Provision the second device with its memberID, J-Number, and, optionally, the MAC address.
- Provision the module with its J-Number. Then, provision VSF link and ports on that module.
- Connect the new device (with the factory default configuration) to this VSF device. The new device should be connected to the configured VSF ports.
- The new device will reboot and join as standby.