copy tftp flash

Syntax 

copy tftp flash <IP-ADDR>  flash [primary|secondary][oobm]

Description

When executed in the destination switch, downloads the software flash in the source switch's primary flash to either the primary or secondary flash in the destination switch.

Parameters and options

primary

If you do not specify either a primary or secondary flash location for the destination, the download automatically goes to primary flash.

secondary

If you do not specify either a primary or secondary flash location for the destination, the download automatically goes to primary flash.

oobm

For switches that have a separate OOBM port, the oobm parameter specifies that the TFTP traffic must come in through the OOBM interface. If this parameter is not specified, the TFTP traffic comes in through the data interface. The oobm parameter is not available on switches that do not have a separate OOBM port.

Download from primary flash

To download a software file from primary flash in a switch with an IP address of 10.29.227.103 to the primary flash in the destination switch, you would execute the following command in the destination switch's CLI:

Switch-to-switch, from primary in source to either flash in destination