copy crash-data

Syntax

copy crash-data [<SLOT-ID>|master] tftp <IP-ADDRESS> <FILENAME> [oobm]
        

copy crash-data [<SLOT-ID>|mm] usb <FILENAME>
        

copy crash-data [<SLOT-ID>|mm] xmodem
        

Description

These commands copy the crash data content to a remote host, attached USB device, or to a serially connected PC or UNIX workstation using TFTP, USB, or Xmodem. You can copy individual slot information or the management module’s switch information. If you do not specify either, the command defaults to the management function’s data. You can copy individual slot information or the management module (mm) switch information. If you do not specify either, the command defaults to the mm data.

Parameters and options

<SLOT-ID>

a - h—Retrieves the crash log or crash data from the processor on the module in the specified slot

mm

Retrieves crash log or crash data from the switch's chassis processor. When "mm" is specified, crash files from both management modules are copied.

oobm

For switches that have a separate OOBM port, specifies that the transfer is through the OOBM interface. (Default is transfer through the data interface.)