show ipv6 route

Syntax

show ipv6 route ipv6-addr connected

Description

Displays the routes in the IPv6 routing table of the switch.

Options

ipv6-addr: Optional. Limits the output to show the gateway to the specified IPv6 address.
connected: Optional. Limits the output to show only the gateways to IPv6 addresses connected to VLAN interfaces configured on the switch, including the loopback (::1/128) address.
Dest: The destination address for a detected route.
Gateway: The IPv6 address or VLAN interface used to reach the destination. (Includes the loopback address.)
Type: Indicates route type (static, connected, or OSPF).
Distance: The administrative route distance, used to determine the best path to the destination.
Metric: Indicates the route cost for the selected destination.

Example output

This example displays the routes in the IPv6 routing table of the switch.

“Unknown” Address

Dest : ::/0                                     Type : static
Gateway : fe80::213:c4ff:fedd:14b0%vlan10              Dist. : 40 Metric : 0

Loopback Address

Dest : ::1/128                                  Type : connected
Gateway : lo0                                          Dist. : 0 Metric : 1

Global Unicast Address configured on the Switch

Dest : 2001:db8:a03:e102::/64                   Type : connected
Gateway : VLAN10                                       Dist. : 0 Metric : 1

Link-Local Address configured on the Switch

Dest : fe80::%vlan10                            Type : connected
Gateway : VLAN10                                       Dist. : 0 Metric : 1

Link-Local Address Assigned to the Loopback Address

Dest : fe80::1%lo0                              Type : connected
Gateway : lo0                                          Dist. : 0 Metric : 1