show ipv6 pim6 mroute

Syntax

show ipv6 pim6  mroute <GRP-ADDR> <SRC-ADDR>

Description

Shows specific information of PIMv6 from the IPv6 multicast routing table.

Command context

config

Parameters

<GRP-ADDR>

Specifies the multicast group address.

<SRC-ADDR>

Specifies the multicast source address.

Examples

IPv6 multicast route entries

switch (config)# show ipv6 pim6 mroute

Total number of entries : 2

Group Address     : ff47::56:12:33
Source Address    : 1000::10:6
Upstream Neighbor : fe80::b25a:daff:fe96:100
VLAN              : 20

Group Address     : ff47::56:12:34
Source Address    : 1000::10:6
Upstream Neighbor : fe80::b25a:daff:fe96:100
VLAN              : 20                                           
                   
switch (config)# show ipv6 mroute ff47::56:12:33 1000::10:6

Group Address              : ff47::56:12:33
Source Address             : 1000::10:6
Source Mask                : ffff:ffff:ffff:ffff::
Neighbor                   : fe80::b25a:daff:fe96:100
VLAN                       : 20
Up Time (sec)              : 165
Expire Time (sec)          : 293

Multicast Routing Protocol : PIM-SM
Unicast Routing Protocol   : ospf3

Metric                     : 2
Metric Pref                : 110
Assert Timer               : 0
RP tree                    : Yes

Downstream Interfaces

VLAN State      Up Time (sec)      Expire Time (sec)
---- ---------- ------------------ ------------------
30   forwarding 166                181