Enabling MVRP on an interface
By default, MVRP is disabled on all interfaces.
Syntax
mvrp {enable | disable}
no mvrp
Description
Enables MVRP on an interface. MVRP must be enabled globally and at least on one interface.
Use
no mvrp
to disable MVRP.
Parameters
enable
Enable
mvrp
disable
Disable
mvrp
Example output
switch(config)# mvrp disable Disable MVRP. enable Enable MVRP. switch(config)# mvrp enable switch(config)# interface 1 switch(eth-1)# mvrp enable switch(eth-1)# show mvrp config Configuration and Status - MVRP Global MVRP status : Enabled Port Status Periodic Registration Join Leave LeaveAll Periodic Timer Type Time Timer Timer Timer ------- -------- -------- ------------ ---- -------- -------- -------- 1 Enabled Enabled Normal 20 300 1000 100 2 Disabled Enabled Normal 20 300 1000 100