Configuring port-based VLAN parameters
The CLI configures and displays both port-based and protocol-based VLANs (see Using the CLI to configure port-based and protocol-based VLAN parameters.
In the factory default state, the switch is enabled for up to 256 VLANs, all ports belong to the default primary VLAN and are in the same broadcast/multicast domain. The default VLAN is also the default Primary VLAN; see The primary VLAN. In addition to the default VLAN, you can configure additional static VLANs by adding new VLAN names and VIDs, and then assigning one or more ports to each VLAN. (The maximum of VLANs includes the default VLAN, all additional static VLANs you configure, and any dynamic VLANs the switch creates if you enable GVRP; see GVRP.) Each port can be assigned to multiple VLANs by using VLAN tagging; see VLAN tagging rules.)