RPVST+ event log messages
Event |
Log message |
---|---|
STP enabled/disabled on a VLAN |
Spanning tree Protocol enabled/disabled on vlan vlan-id
|
Switch does not receive BPDUs from peer on a particular VLAN and port |
VLAN vlan-id starved for a BPDU on port port number from bridge name
|
Switch received BPDU with inconsistent VLAN |
Blocking port-name on vlan vlan-id.
|
Inconsistency is restored |
Unblocking
port-name on vlan vlan-id Port consistency
restored.
|
Root port is changed on a VLAN |
VLAN vlan-idroot changed from bridgepriorty:mac to bridge priority:mac
|
Switch received a BPDU with invalid TLV |
Received SSTP BPDU with bad TLV on port-number vlan-id
|
The number of |
The number of vlan-port
instances exceeded the recommended limit of num
|
RADIUS subsystem tries to dynamically change port VLAN assignments when mode is RPVST |
RADIUS unable
to assign port to VLAN vlan-id because
spanning-tree is running in RPVST+ mode
|
LLDP subsystem tries to dynamically change port VLAN assignments when mode is RPVST |
LLDP unable to assign port port-number to VLAN vlan-id because spanning-tree is running in RPVST+ mode
|
VPORT counts exceed 200 |
The number
of vPorts on slot slot-number exceeds the
recommended limit of vport-count. PVST
BPDUs may be dropped.
|