Additional VLAN tagging considerations
Since the purpose of VLAN tagging is to allow multiple VLANs on the same port, any port that has only one VLAN assigned to it can be configured as "Untagged" (the default) if the authorized inbound traffic for that port arrives untagged.
- Any port with two or more VLANs of the same type can have one such VLAN assigned as "Untagged." All other VLANs of the same type must be configured as "Tagged," that is:
Port-Based VLANs
Protocol VLANs
A port can be a member of one untagged, port-based VLAN. All other port-based VLAN assignments for that port must be tagged.
A port can be an untagged member of one protocol-based VLAN of each protocol type. When assigning a port to multiple, protocol-based VLANs sharing the same type, the port can be an untagged member of only one such VLAN.
A port can be a tagged member of any port-based VLAN.
A port can be a tagged member of any protocol-based VLAN. See above.
A given VLAN must have the same VID on all 802.1Q-compliant devices in which the VLAN occurs. Also, the ports connecting two 802.1Q devices should have identical VLAN configurations.
If all end nodes on a port comply with the 802.1Q standard and are configured to use the correct VID, you can configure all VLAN assignments on a port as "Tagged" if doing so either makes it easier to manage your VLAN assignments, or if the authorized, inbound traffic for all VLANs on the port will be tagged.
"Untagged Packet Forwarding" and Untagged VLAN operation
"Tagged Packet Forwarding" and Tagged VLAN operation