`radius-server host tls dyn-authorization`

Syntax

radius-server host <IP-ADDR | FQDN> tls dyn-authorization
no radius-server host <IP-ADDR | FQDN> tls dyn-authorization

Description

Enables dynamic authorization. The Disconnect-Request and CoA-Request messages from the RADIUS server are accepted and processed. By default, dynamic authorization messages are ignored.

The no form of the command disables dynamic authorization.

Command context

config

Parameters

IP-ADDR: Specifies server IPv4 address.
FQDN: Specifies server FQDN.

Example

radius-server host 10.2.97.10 tls dyn-authorization