Debugging a RadSec connection using logs

Use any of the following debug commands to troubleshoot connection issues:

Following is a sample of debug log:

switch(config)# debug destination session
switch(config)# debug security radsec
switch(config)# debug security radius

0005:00:08:46.73 RAD  mRadiusCtrl:ACCESS REQUEST id: 1 to 192.168.1.252 session:
   0, access method: CONSOLE, User-Name: user1, NAS-IP-Address: 20.1.1.251.
0005:00:08:46.89 RAD  mRadiusCtrl:ACCESS REQUEST id: 1 to 192.168.1.252 session:
   0, access method: CONSOLE, NAS-identifier: HP-VSF-Switch.
0005:00:08:47.04 RAD  mRadiusCtrl:Tracking packets alarm set
0005:00:08:47.11 RAD  tRadsecR:ACCESS ACCEPT id: 1 from 192.168.1.252 received.


0005:00:12:12.89 RSEC tRadsecR:RADSEC: getsockopt() err code : 58, socket down
   and closed.

0005:00:15:23.82 RSEC mRadiusCtrl:RADSEC: successfully established connection
   with server 192.168.1.252.