Configuring authorized IP managers for switch access
To configure one or more IPv6-based management stations to access the switch using the authorized IP managers feature, enter the
ipv6 authorized-managers command.
Syntax:
ipv6 authorized-managers
<ipv6–addr> [ipv6-mask] [access
<operator | manager>
] access-method [all | ssh | telnet | web | snmp | tftp]
no ipv6 authorized-managers
<ipv6–addr> [ipv6-mask] [access
<operator | manager>
] access-method [all | ssh | telnet | web | snmp | tftp]
Configures one or more authorized IPv6 addresses to access the switch, where:
ipv6-mask : Specifies the mask that is applied to an IPv6 address to determine authorized stations.
Default:
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF.
access
<operator|manager>
: Specifies the level of access privilege granted to authorized stations. Applies only to access through Telnet, SSH, and SNMP (version 1, 2, and 3). Default:
Manager.
access-method [all | ssh | telnet | web | snmp | tftp] : Configures access levels by access method and IP address. Each management method can have its own set of authorized managers. Default:
All.