Viewing the TLVs advertised

The show commands display the configuration of the TLVs. The command show lldp config lists the TLVs advertised for each port, as shown in the following examples.

Displaying the TLVs for a port

switch(config)# show lldp config a1

 LLDP Port Configuration Detail

  Port   : A1
  AdminStatus [Tx_Rx] : Tx_Rx
  NotificationEnabled [False] : False
  Med Topology Trap Enabled [False] : False

  TLVS Advertised:
  * port_descr
  * system_name
  * system_descr
  * system_cap

  * capabilities
  * network_policy
  * location_id
  * poe

  * macphy_config

  * port_vlan_id 1

 IpAddress Advertised:
  :
  :

  • 1The VLAN ID TLV is being advertised.

Local device LLDP information

switch(config)# show lldp config info local-device a1

 LLDP Port Configuration Information Detail

  Port     : A1
  PortType : local
  PortId   : 1
  PortDesc : A1

  Port VLAN ID : 1 1

  • 1The information that LLDP used in its advertisement.

Remote device LLDP information

switch(config)# show lldp info remote-device a1

LLDP Remote Device Information Detail

  Local Port   : A1
  ChassisType  : mac-address
  ChassisId    : 00 16 35 22 ca 40
  PortType     : local
  PortID       : 1
  SysName      : esp-dback
  System Descr : J8693A Switch, revision XX.13.03, ROM...
  PortDescr    : A1

  System Capabilities Supported : bridge, router
  System Capabilities Enabled   : bridge, router

  Port VLAN ID : 200

  Remote Management Address
     Type    : ipv4
     Address : 192.168.1.1