Configuring the savepower port-low-pwr option
The port-low-pwr option puts
all the ports on the switch into auto low power mode if they are not
linked.
Syntax:
[no] savepower port-low-pwr
Puts ports in low power mode.
When a link is detected, the ports return to normal power mode.
The no form of the command
puts the ports into normal power mode.
The savepower port-low-power command
switch(config)# savepower port-low-pwr
To display the status of the power-down feature,
use the show savepower portlow-pwr command. The
output shows if the feature is enabled or not enabled.
Output for the show savepower port-low-pwr command
switch(config)# show savepower port-low-pwr Port Save Power Status: Enabled