Creating a device identity and associating a device type

Procedure

Create a device identity using the command:

switch# device-identity name <DEVICE-NAME>

Specify the OUI used in LLDP's organization using specific TLV, (type =127). OUI should be in XXXXXX format. The default OUI "000000" indicates that device-identity will not use LLDP to identify device:
```
switch(config)# device-identity name <DEVICE-NAME> lldp oui <MAC_OUI>
 sub-type <SUBTYPE>
```
To add new device on switch:
```
switch(config)# device-identity name abc lldp oui a1b2c3 sub 2
```
To remove device from switch:
```
switch(config)# no device-identity name abc
```
Show device identity configuration:
```
switch(config)# show device-identity lldp

Device Identity Configuration

 Index  Device name            Oui        Subtype
 ------ ---------------------- ---------- -------
 1      abc                    a1b2c3     2     
```
NOTE:
The maximum devices that can be configured using device-identity are 16. The maximum devices that can be associated using device-profile are 19. The maximum profiles that can be created using device-profile are 17.