`cfg-restore non-blocking`

Syntax

cfg-restore {flash | tftp | sftp} <FILE-NAME> non-blocking

Description

Performs restore in non-blocking mode.

Command context

config

Example

switch(config)# cfg-restore flash add non-blocking
Current running-configuration will be replaced with 'add'.
Continue (y/n)? y
Configuration restore is in progress, configuration changes are
temporarily disabled.
switch(config)#

switch(config)# show cfg-restore status
 Status                 : Success
 Config File Name       : add
 Source                 : Flash
 Time Taken             : 2 Seconds
 Last Run               : Sun Oct 22 22:09:02 2017

 Recovery Mode          : Enabled
 Failure Reason         : -

 Number of Add Commands    : 7
 Number of Remove Commands : 10

Time Taken for Each Phase :                                               
      Calculating diff     : 1 Seconds
      Adding commands      : 0 Seconds
      Removing commands    : 0 Seconds