Switch prompts used in this guide

Examples in this guide are representative and may not match your particular switch/environment. Examples use simplified prompts as follows:

Prompt	Explanation
`switch#`	`#` indicates manager context (authority).
`switch>`	`>` indicates operator context (authority).
`switch(config)#`	`(config)` indicates the config context.
`switch(vlan-x)#`	`(vlan-x)` indicates the vlan context of config, where `x` represents the VLAN ID. For example: `switch(vlan-128)#`.
`switch(eth-x)#`	`(eth-x)` indicates the interface context of config, where `x` represents the interface. For example: `switch(eth-48)#`.
`switch-Stack#`	`Stack` indicates that stacking is enabled.
`switch-Stack(config)#`	`Stack(config)` indicates the config context while stacking is enabled.
`switch-Stack(stacking)#`	`Stack(stacking)` indicates the stacking context of config while stacking is enabled.
`switch-Stack(vlan-x)#`	`Stack(vlan-x)` indicates the vlan context of config while stacking is enabled, where `x` represents the VLAN ID. For example: `switch-Stack(vlan-128)#`.
`switch-Stack(eth-x/y)#`	`Stack(eth-x/y)` indicates the interface context of config, in the form `(eth-<member-in-stack>/<interface>)`. For example: `switch(eth-1/48)#`