copy tftp flash os
Syntax
copy tftp flash <IP-ADDR> [/os/primary|/os/secondary][primary|secondary] [oobm]
Description
This command (executed in the destination switch) gives you the most options for downloading between switches. If you do not specify either a primary or secondary flash location for the destination, the download automatically goes to primary flash.
Parameters and options
oobmFor switches that have a separate out-of-band management port, the
oobmparameter specifies that the TFTP traffic must come in through the out-of-band management interface. If this parameter is not specified, the TFTP traffic comes in through the data interface. Theoobmparameter is not available on switches that do not have a separate out-of-band management port.
Switch-to-switch, from either flash in source to either flash in destination
To download a software file from secondary flash in a switch with an IP address of 10.28.227.103 to the secondary flash in a destination switch, you would execute the following command in the destination switch's CLI:
switch# copy tftp flash 10.29.227.13 flash /os/secondary secondary Device will be rebooted, do you want to continue [y/n]? y 00184K