Syncing commands
The following CLI commands can be executed during initial syncing between the active management module and the standby management module, which occurs when the standby module is inserted or after a reboot of the system. All other CLI commands will not be executed until after the initial syncing completes.
During initial syncing, no SNMP set requests are executed, except the SNMP request for ping.
Operator commands |
||
|---|---|---|
dir |
menu |
traceroute6 |
enable |
ping |
dbgstack |
exit |
ping6 |
wireless-services |
link-test |
show |
services |
logout |
traceroute |
|
Manager commands |
||
|---|---|---|
boot system |
copy running-config |
page |
boot active |
copy startup-config |
print |
boot standby |
copy event-log |
redo |
configure |
copy core-dump |
reload |
copy command-output |
recopy |
repeat |
copy config tftp |
display |
task-monitor |
copy config xmodem |
end |
telnet |
copy crash-data |
getMIB |
terminal |
copy crash-log |
kill |
walkMIB |
copy flash tftp |
licenses |
write-terminal |
copy flash xmodem |
log |
redundancy |