Configuring forced fast-leave IGMP
For information about forced fast-leave, see Forced fast-leave IGMP.
Syntax:
vlan <vid> ip igmp forcedfastleave <port-list>
no vlan <vid> ip igmp forcedfastleave <port-list>
Enables IGMP forced fast-leave on the specified ports in the selected VLAN, even if they are cascaded.
The
no
form of the command disables forced fast-leave on the specified ports in the selected VLAN.
Use
show running
to display the ports per-VLAN on which forced fast-leave is enabled.
Default: Disabled
show running-config |
Displays a nondefault IGMP forced fast-leave configuration on a VLAN. If configured, the
|
forcedfastleave |
Can be used when there are multiple devices attached to a port. |