Enabling immediate transition to forwarding on end nodes

Syntax:

spanning-tree port-list admin-edge-port

no spanning-tree port-list admin-edge-port

Enables admin-edge-port on ports connected to end nodes. During spanning tree establishment, ports with admin-edge-port enabled transition immediately to the forwarding state. If a bridge or switch is detected on the segment, the port automatically operates as non-edge, not enabled.

Default: Disabled

If admin-edge-port is disabled on a port and auto-edge-port has not been disabled, the auto-edge-port setting controls the behavior of the port.

The no form of this command disables edge port operation on the specified ports.