Event log messages

Cause

Event

Message

RMON_AUTH_TWO_FACTOR_AUTHEN_STATUS

W 01/01/15 18:24:03 03397: auth: %s.

Examples:

W 01/01/15 18:24:03 03397: auth: Public key and username/password should be configured for the successful two-factor authentication.

W 01/01/15 18:24:03 03397: auth: Username and password should be configured for the successful two-factor authentication.

W 01/01/15 18:24:03 03397: auth: Public key should be configured for the successful two-factor authentication.

I 01/01/15 18:24:03 03397: auth: The validation of certificate of SSH user ‘user1’ is successful.

RMON_SSH_KEY_TWO_FACTOR_EN

W 01/01/15 18:24:03 03399: ssh: %s.

Examples:

W 01/01/15 18:24:03 03399: ssh: The client public keys without username will not be considered for the two-factor authentication for SSH session.

W 01/01/15 18:24:03 03399: ssh: The privilege level for the user with the SSH key conflicts with the user configured.

RMON_SSH_TWO_FACTOR_AUTH_FAIL

W 01/01/15 18:24:03 03398: ssh: %s.

Examples:

W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed due to the failure in public key authentication.

W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed due to the failure in username/password authentication.

W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed due to the failure in validating the client certificate.

W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed as “ssh-server” certificate is not installed.

When NTP client enabled.

NTP client is enabled.

When NTP client disabled.

NTP client is disabled.

When NTP found a new broadcast server.

A new broadcast server at %s.

When system clock was updated with new time.

The system clock time was changed by %ld sec %lu nsec. The new time is %s.

When NTP stratum was updated.

The NTP Stratum was changed from %d to %d.

When all NTP associations are cleared.

All the NTP server associations are reset.

When server is not reachable.

The NTP Server 10.1.1.2 is unreachable. (2 times in 60 seconds)

When MD5/SHA1 authentication failed.

The MD5 authentication on the NTP packet failed.

The SHA1 authentication on the NTP packet failed.