Requirements for using IPv6 ACL logging

• The switch configuration must include an ACL (1) assigned to a port, trunk, or static VLAN interface and (2) containing an ACE configured with the denyaction and the log option.

• If the RACL application is used, then IPv6 routing must be enabled on the switch.

• For IPv6 ACL logging to a syslog server:

  • The server must be accessible to the switch and identified in the running configuration.

  • The logging facility must be enabled for syslog.

  • Debug must be configured to:

    • Support ACL messages

    • Send debug messages to the desired debug destination

These requirements are described in more detail under Enabling ACL logging on the switch.