[no] ntp
This command disables NTP and removes all NTP configurations on the device.
Syntax
[no] ntp [authentication <key-id>
| broadcast | enable | max-association
<integer> | server
<IP-ADDR> | trap
<trap-name> | unicast]
Description
Disable NTP and removes the entire NTP configuration.
Options
- authentication
Configure NTP authentication.
- broadcast
Operate in broadcast mode.
- enable
Enable/disable NTP.
- max-association
Maximum number of Network Time Protocol (NTP) associations.
- server
Configure a NTP server to poll for time synchronization.
- trap
Enable/disable NTP traps.
- unicast
Operate in unicast mode.
Example
switch(config)# no ntp
This will delete all NTP configurations on this device. Continue [y/n]?