RMON_AUTH_TWO_FACTOR_AUTHEN_STATUS
|
W 01/01/15 18:24:03 03397: auth: %s.
Examples:
W 01/01/15 18:24:03 03397: auth: Public key and username/password should be configured for the successful two-factor authentication.
W 01/01/15 18:24:03 03397: auth: Username and password should be configured for the successful two-factor authentication.
W 01/01/15 18:24:03 03397: auth: Public key should be configured for the successful two-factor authentication.
I 01/01/15 18:24:03 03397: auth: The validation of certificate of SSH user ‘user1’ is successful.
|
RMON_SSH_KEY_TWO_FACTOR_EN
|
W 01/01/15 18:24:03 03399: ssh: %s.
Examples:
W 01/01/15 18:24:03 03399: ssh: The client public keys without username will not be considered for the two-factor authentication for SSH session.
W 01/01/15 18:24:03 03399: ssh: The privilege level for the user with the SSH key conflicts with the user configured.
|
RMON_SSH_TWO_FACTOR_AUTH_FAIL
|
W 01/01/15 18:24:03 03398: ssh: %s.
Examples:
W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed due to the failure in public key authentication.
W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed due to the failure in username/password authentication.
W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed due to the failure in validating the client certificate.
W 01/01/15 18:24:03 03398: ssh: The two-factor authentication for SSH session failed as “ssh-server” certificate is not installed.
|
When NTP client enabled.
|
NTP client is enabled.
|
When NTP client disabled.
|
NTP client is disabled.
|
When NTP found a new broadcast server.
|
A new broadcast server at %s.
|
When system clock was updated with new time.
|
The system clock time was changed by %ld sec %lu nsec. The new time is %s.
|
When NTP stratum was updated.
|
The NTP Stratum was changed from %d to %d.
|
When all NTP associations are cleared.
|
All the NTP server associations are reset.
|
When server is not reachable.
|
The NTP Server 10.1.1.2 is unreachable. (2 times in 60 seconds)
|
When MD5/SHA1 authentication failed.
|
The MD5 authentication on the NTP packet failed.
The SHA1 authentication on the NTP packet failed.
|