TFTP: Copying a customized command file to a switch (CLI)
Using the copy tftp command
with the show-tech option provides the ability to copy a customized command file to
the switch. When the show tech custom command is
executed, the commands in the custom file are executed instead of
the hard-coded list of commands. If no custom file is found, the current
hard-coded list is executed. This list contains commands to display
data, such as the image stamp, running configuration, boot history,
port settings, and so on.
Syntax:
copy tftp show-tech <ipv4 or ipv6 address> <filename>
Copies a customized command file to the switch (see Using the copy tftp show-tech command to upload a customized command file).
Using the copy tftp show-tech command to upload a customized command file
switch(config)# copy tftp show-tech 10.10.10.3 commandfile1
Syntax:
show tech custom
Executes the commands found in a custom file instead of the hard-coded list.
Exit the global config mode (if needed) before
executing show tech commands.
You can include show tech commands
in the custom file, with the exception of show tech custom. For example, you can include the command show tech all.
If no custom file is found, a message displays
stating "No SHOW-TECH file found." (No custom file was uploaded with
the copy tftp show-tech command.)
The show tech custom command
switch# show tech custom No SHOW-TECH file found.