RADIUS server fails to respond to a request for service, even though the server's IP address is correctly configured in the switch

Use show radius to verify that the encryption key the switch is using is correct for the server being contacted. If the switch has only a global key configured, it either must match the server key or you must configure a server-specific key. If the switch already has a server-specific key assigned to the server's IP address, it overrides the global key and must match the server key.

Global and unique encryption keys

Switch(config)# show radius
 Status and Counters - General RADIUS Information
  Deadtime(min) : 0
  Timeout(secs) : 5
  Retransmit Attempts : 3
  Global Encryption Key : My-Global-Key 1
  Dynamic Authorization UDP Port : 3799

                  Auth Acct DM/ Time
  Server IP Addr  Port Port CoA Window Encryption Key
  --------------- ---- ---- --- ------ ---------------
  10.33.18.119    1812 1813            119-only-key 2
  • 1

    Global RADIUS Encryption Key

  • 2

    Unique RADIUS Encryption Key for the RADIUS server at 10.33.18.119