DHCPv6 show commands
Use this command to show DHCPv6 snooping information.
Syntax
show dhcpv6-snooping [stats] [bindings]
- stats
Shows DHCPv6 snooping statistics.
- bindings
Shows DHCPv6 binding state entries in a tabular format.
Examples
The following example shows all available DHCPv6 snooping information.
switch(config)# show dhcpv6 snooping DHCP Snooping Information DHCP Snooping : Yes Enabled VLANs : 1 13 16 Remote-ID : MAC Store Lease Database : Yes URL : tftp://120.93.49.9/avi Read at boot : no Write Delay : 300 Write Timeout : 300 File Status : up-to-date Write Attempts : 0 Write Failures : 0 Last Successful File Update Max Current Bindings Port Trust Bindings Static Dynamic _____ ______ ________ _______ _________ 1 Yes - - - 2 No 20 20 3 4 No 3* 3 6 4 No 543 231 10 13 No - 3 6 48 Yes - - - Ports 3,5-12,14-47 are untrusted. Note that show commands list only those ports that have bindings on them. Ports 3, 5, 6,8 are untrusted as they are not listed in table and they do not have associated bindings.
The following example shows DHCPv6 snooping statistics.
switch(config)# show dhcpv6 snooping stats Packet Type Action Reason Count ___________ ______ ______ _____ server forward from trusted port 0 client forward to trusted port 0 server drop received on validating port 0 server drop unauthorized server 0 client drop destination on validating port 0 client drop relay reply on validating port 0 client drop bad DHCPv6 release request 0 client drop failed verify MAC check 0 client drop failed on max-binding limit 0