Viewing the current instrumentation monitor configuration
The
show instrumentation monitor configuration
command displays the configured thresholds for monitored parameters.
Viewing the instrumentation monitor configuration
switch# show instrumentation monitor configuration PARAMETER LIMIT ------------------------- --------------- mac-address-count 1000 (med) ip-address-count 1000 (med) system-resource-usage 50 (med) system-delay 5 (high) mac-moves/min 100 (med) learn-discards/min 100 (med) ip-port-scans/min 10 (med) arp-requests/min 100 (low) login-failures/min 10 (med) port-auth-failures/min 10 (med) SNMP trap generation for alerts: enabled Instrumentation monitoring log : enabled
An alternate method of determining the current Instrumentation Monitor configuration is to use the
show run
command. However, the
show run
command output does not display the threshold values for each limit set.