Static ACLs

Static ACLs are configured on the switch. To apply a static ACL, you must assign it to an interface (VLAN or port).

  • VLAN ACL (VACL)

    A VACL is an ACL configured on a VLAN to filter traffic entering the switch on that VLAN interface and having a destination on the same VLAN.

  • Static port ACL

    A static port ACL is an ACL configured on a port to filter traffic entering the switch on that port, regardless of whether the traffic is routed, switched, or addressed to a destination on the switch itself.

NOTE:

The information provided here describes the IPv4 ACL applications you can statically configure on the switch. For information on static IPv6 ACL applications, see “IPv6 Access Control Lists (ACLs)” in the IPv6 configuration guide for your switch.