Displaying traffic/security filters
This command displays a listing of all filters by index number and also enables you to use the index number to display the details of individual filters.
Syntax:
show filter
- Filter Type
Indicates the type of filter assigned to the IDX number (source-port, multicast, or protocol).
- Value
Indicates the port number or port-trunk name of the source port or trunk assigned to the filter.
[index]
Lists the filter type and other data for the filter corresponding to the index number in the show filter output. Also lists, for each outbound destination port in the switch, the port number, port type, and filter action (forward or drop). The switch assigns the lowest available index number to a new filter. If you delete a filter, the index number for that filter becomes available for the next filter you create.