Configuring one station per Authorized manager IP entry
This is the easiest way to apply a
mask. If you have ten or fewer management and/or operator stations,
you can configure them by adding the address of each to the Authorized
manager IP list with 255.255.255.255 for the corresponding
mask. For example, as shown in The show authorized-managers command with access method configured, if you configure an IP address of 10.28.227.125 with
an IP mask of 255.255.255.255, only a station having
an IP address of 10.28.227.125 has management access
to the switch.
1st Octet |
2nd Octet |
3rd Octet |
4th Octet |
manager-Level or operator-Level Device Access |
|
|---|---|---|---|---|---|
| IP Mask | 255 |
255 |
255 |
255 |
The “255” in each octet of the mask specifies that only the exact value in that octet of the corresponding IP address is allowed. This mask allows management access only to a station having an IP address of 10.33.248.5. |
| Authorized manager IP | 10 |
28 |
227 |
125 |